Tough Coat Application Sponge Fusion
Tough Coat sponges are made to take the stress away from your top coat application!
Made with an ergonomic grip for your hand, our sponges make it so easy to apply our Tough Coat.
It is easiest to pour your Tough Coat on a disposable paper plate. Slightly dampen your sponge with water and dip it evenly in our Tough Coat. Start at one end of your project and do a solid swipe in one direction. Repeat this process over your entire piece. Ensuring you always wipe your sponge in one direction only. Do not wipe backwards over the wet Tough Coat surface. Do not “fix” a spot, just leave it and the second coat will fix it. To ensure a smooth, streak free application wipe in one direction.
Let your Tough Coat dry for approximately 2-4 hours before repeating the process.
When using these sponges, you can keep them in a zip lock bag with the air removed to prevent it from drying between coats.
Clean up - use our Brush Cleaner and water to rinse out the residue in your sponge. Rinse well and let dry. Keep your sponge for future projects. You can reuse your sponge approximately 3-5 times.